• P Trouble Codes
• U Trouble Codes
• B Trouble Codes
• C Trouble Codes
• D Trouble Codes

P1064 Alfa Romeo Auto Trouble Code

P1064 Alfa Romeo OBD2 may also be triggered by faults earlier down the line. For example, a dirty MAF sensor might be causing the car to overcompensate in its fuel-trim adjustments. As a result, oxygen sensors are likely to report fuel mixture problems.

The computer notices the canister is empty when it detects a leaner condition (all the vapors are used up) and it resumes normal fuel delivery. Some car manufacturers then close the vent solenoid but leave the purge solenoid open. That creates a vacuum throughout the entire fuel storage system. Once the correct vacuum is reached, it closed the purge solenoid and waits to see if the vacuum holds.

P1064 Alfa Romeo Possible Solution:

The firing order is an important part of the overall design of the engine and is determined during the design of the engine to eliminate as much engine vibration as possible. If the firing order is changed or adjusted, the ignition from the spark plug is delivered at the wrong time and the engine functions poorly or does not run. The firing order for a particular engine is typically found in the repair manual specific to that model.

P1064 Alfa Romeo Description For All Models :

• Alfa Romeo 145
• Alfa Romeo 146
• Alfa Romeo 147
• Alfa Romeo 149
• Alfa Romeo 155
• Alfa Romeo 156
• Alfa Romeo 159
• Alfa Romeo 1600
• Alfa Romeo 164
• Alfa Romeo 166
• Alfa Romeo 175
• Alfa Romeo 1750
• Alfa Romeo 179
• Alfa Romeo 1900
• Alfa Romeo 20
• Alfa Romeo 2000
• Alfa Romeo 22
• Alfa Romeo 2300
• Alfa Romeo 2600
• Alfa Romeo 2900
• Alfa Romeo 33
• Alfa Romeo 4c
• Alfa Romeo 66
• Alfa Romeo 6c
• Alfa Romeo 75
• Alfa Romeo 8c
• Alfa Romeo 90
• Alfa Romeo Alfa
• Alfa Romeo Alfasud
• Alfa Romeo Alfetta
• Alfa Romeo Ar
• Alfa Romeo Arna
• Alfa Romeo Berlina
• Alfa Romeo Brera
• Alfa Romeo Concept
• Alfa Romeo Crosswagon
• Alfa Romeo Eagle
• Alfa Romeo Giulia
• Alfa Romeo Giulietta
• Alfa Romeo Gp
• Alfa Romeo Gp159
• Alfa Romeo Graduate
• Alfa Romeo Gt
• Alfa Romeo Gta
• Alfa Romeo Gtv
• Alfa Romeo Junior
• Alfa Romeo Long
• Alfa Romeo Mito
• Alfa Romeo Montreal
• Alfa Romeo Rl
• Alfa Romeo Rm
• Alfa Romeo Rz
• Alfa Romeo Spider
• Alfa Romeo Sportwagon
• Alfa Romeo Sprint
• Alfa Romeo Stelvio
• Alfa Romeo Sz

P1064 Alfa Romeo Trouble Repair : If your vehicle failed a P1064 Alfa Romeo test and the P1064 Alfa Romeo Check Engine Light is NOT on, chances are you have a problem with the OBDII system, a burned out MIL lamp, or a faulty catalytic converter. The converter is essentially an afterburner that cleans up the exhaust after it exits the engine. The OBDII system uses a ownstream oxygen sensor to monitor the efficiency of the converter, and it should detect a drop in converter efficiency if the converter has been contaminated or is failing (ignition misfiring, leaky exhaust valves, and oil burning can all damage the converter). What you want to look any conditions that might cause ignition misfire, an overly rich or lean fuel condition, or loss of compression. Use your OBD Express DIY to look at the oxygen sensor outputs, coolant temperature, airflow, calculated engine load, and inlet air temperature.

Code Search

Please fill the search bar to find Auto Trouble Code meaning.

P U B C	Example: 0120

All auto trouble codes with car brands.

About Us | Contact | Privacy

Copyright 2016 © - https://autotroublecode.com